Article

Bluetooth Module and Winbook 7″ Tablet for Configuring SBGC Alexmos Gimbal Controllers

I want to say more than 80% of HandHeld Gimbals on the market right now run off of the Alexmos SBGC Controllers. This includes the CAMETV 7500/7800/8000, Tiyaga, and Varavon Birdycam2 stabilizers. If you don’t already have it, adding a Bluetooth Module to your SBGC Controller is super convenient when you want to change PID, RC, or Follow Mode settings. The Android software can also remotely control Pan, Tilt, and Roll if you want to work with Dual Operators or if you have your gimbal mounted to the end of a long Crane / Jib.

Of course the software is limited and at times you may want to upgrade or downgrade firmware, Export your Profiles, or Load other Profiles that are saved on your computer. To do this you’ll need the full desktop version of the software. Instead of lugging a laptop around, this 7″ Winbook for around $80 dollars (found here) runs the full Windows Operating system so that you can install Java and the SBGC software. The tablet is small, lightweight, and slim and can be extremely handy out in the field. For the price, it’s something that can easily fit into my gimbal case that I won’t be without.

7 inch winbook full usb sbgc software
find-price-button 7″ Winbook Windows Operating System with Full USB Port

Touching back on the Bluetooth Module that some of you may want to add-on to your gimbal systems. It’s very easy to install as there are only 4 connections that go to the side of the SBGC controller. Once it’s installed you simply pair your smart device and launch the software. There is of course TWO THINGS YOU NEED TO KNOW about adding a bluetooth module.

First thing, to be compatible the BT Module should be set to the Baud Rate: 115200. Now if you have a BT Module, you can change it by connecting it through a serial interface adapter to your windows computer and reconfiguring it. I won’t go into details because you’ll just end up spending more money on an adapter and wasting time. You’re better off buying one that is already configured properly. Here’s one i’m using and it works flawlessly for just $13 dollars (found here).

DYS Bluetooth Module Alexmos SBGC
find-price-button Bluetooth Module For Alexmos SBGC Controllers

The Second thing that may be just slightly confusing (if you don’t read the manual) is the the RX input on the board connects to the TX of the BT Module, and the TX on board connects to RX on BT Module. Some BT Modules don’t have the pins in the same place, so you end up having to cross your wires. If you don’t connect this properly you’ll get a ‘serial corrupted’ error message. Other than that, pretty straight forward and should only take a few minutes to throw on.

Connect Bluetooth Module Alexmos SBGC Gimbal Tiyaga CameTV Varavon
Wiring up Bluetooth Module to Alexmos SBGC Gimbal Controller

LEAVE A COMMENT

theme by teslathemes